Appliance

176 Articles   Page 5 of 12   Articles 61 - 75

Measuring the delaminating energy in laminated safety glass
Uwe Keller, Kuraray Specialities Europe GmbH
Impact on Laminated Glass: Post-breakage Behaviour Assessment
Emmanuel Nourry & Jean-Clément Nugue, Saint-Gobain Glass France
Test Pen for the Heat-Soak Treatment
Prof. Ferdinand Trier, Ulrich Ranke, Munich University of Applied Sciences, Laboratory for Sol-Gel techniques
Stress Measurement, Fragmentation and Mechanical Strength - A Review of Test Results According to EN 12150:2000 and EN 1863:2000
Matteo Schiavonato, Stazione Sperimentale del Vetro
Ennio Mognato, Stazione Sperimentale del Vetro
Alex S. Redner, Strainoptic Technologies Inc.
Measurement of Complete Residual Stress Fields in Tempered Glass Plates
Dominique Lochegnies, Université de Valenciennes
Eric Romero, Université de Valenciennes
Johan Anton, GlasStress Ltd
Andrei Errapart, Tallinn University of Technology
Hillar Aben, GlasStress Ltd
Fine Conductor Printing onto Glass
Mr. Roland Drach, Sefar AG Printing Division
Mr. Frank Rubbert, Saint-Gobain Glass Deutschland GmbH
Tempered Bent Glass Quality
Mr. Thomas E. Noe, Glasstech, Inc.
The Stability of Fractured Toughened Glass
Graham Dodd, Arup Materials Consulting
Toughened Glass: Mechanical Properties and EN 12600 Behaviour
Michel Dubru, Glaverbel S.A.
Jean-Clement Nugue, Saint-Gobain
Guy Van Marcke de Lummen, Glaverbel S.A.
The Critical Relationship Between Glass Surface Quality and The Tempering Rollers
Mr. Ren Bartoe, Vesuvius
Automatic Tempering Process and Low-E
Toivo Janhunen & Tarmo Pesonen, Tamglass Engineering Ltd. Oy
Quality Control in Flat Glass Fabrication
Mr. Peter Anderson, Viracon, Inc.
Biaxial Strength of Float Glass Plates with Center Hole
Dr. Michael Emonds, Aachener Chemiche Werke
Dr. Suresh T. Gulati, Research Fellow & Consultant, Corning Inc.
Arto Kaonpää, Tamglass Ltd. Oy
Effect of Different Edges Treatments on the 4-point Bending Strength of Normal and Tempered Glass
Roberto Corti, Z.Bavelloni Spa
Arto Kaonpää, Tamglass Engineering Ltd. Oy
Antti-Pekka Nikkilä, Tampere University of Technology
The Effects of Weather onto Glazing and Their Influence - Part I: The soiling by weather on the outside surface of glazing
Hans Joachim Gläser
Page: 1 2 3 4 5 6 7 8 9 10 More pages     Previous    Next
© Copyrights glassfiles.com by GPD
Supported By