Search Library
Glass canopies for the office center of the DZ Bank in Berlin
Rudolf Hess,
Glasconsult, structural engineering of glass
Glass Performance Days 2007
Conference Proceedings Book
Order hard copy of the over 250 conference papers!
Bending & Tempering
The Critical Relationship Between Glass Surface Quality and The Tempering Rollers
Bill Zhao & Ren Bartoe
The author discusses the critical physical and chemical properties of fused silica ceramic rollers used in the horizontal heat-treating process for safety glass. Those properties coupled with the care and maintenance of rollers and the operating parameters of the tempering furnace are directly assoc...
Probabilistic Assessment of the Bending Strength of Chemically and Thermally Tempered Glass Specimens
Maurizio Froli & Leonardo Lani, University of Pisa
The strength of a structural glass component submitted to increasing loads depends strongly on many factors like temperature, humidity, loads introduction and also on the geometrical features of the component itself. It is well known that glass cannot develop plastic deformations and that it is so e...
Analysis of the Flat Glass Strength Properties
Nadezhda Kondratieva & Vladimir Zubkov, Testing Centre of Samara State University of Architecture and Civil Engineering
Alexander Chesnokov, Public Corporation Glass Institute
Stanislav Chesnokov, Moscow Engineering Physics Institute
Taking into account the modern requirements for buildings and constructions the glass should be considered not only as a light transmissible protecting material, but as an architectural material for mechanical load. In designing the light transmissible constructions the glass thickness is made insti...
33 Articles Page 1 of 3 Articles 1 - 15
 |
Abhi Ray, University of Technology, Sydney Dr Leon Jacob, Jacob and Associates Pty Ltd |
|
Fred Veer, J. Zuidema & F.P.Bos Delft University of Technology |
|
Mauri Saksala, Tamglass Ltd. Oy |
|
Mizuki Nishi, Yoshinori Akamatsu, Shinji Nishikawa & Kentaro Tsutsumi, Central Glass Co., Ltd. |
|
Prof. Ferdinand Trier, Ulrich Ranke, Munich University of Applied Sciences, Laboratory for Sol-Gel techniques |
|
Matteo Schiavonato, Stazione Sperimentale del Vetro Ennio Mognato, Stazione Sperimentale del Vetro Alex S. Redner, Strainoptic Technologies Inc. |
|
Dominique Lochegnies, Université de Valenciennes Eric Romero, Université de Valenciennes Johan Anton, GlasStress Ltd Andrei Errapart, Tallinn University of Technology Hillar Aben, GlasStress Ltd |
|
Mr. Thomas E. Noe, Glasstech, Inc. |
|
Graham Dodd, Arup Materials Consulting |
|
Michel Dubru, Glaverbel S.A. Jean-Clement Nugue, Saint-Gobain Guy Van Marcke de Lummen, Glaverbel S.A. |
|
Mr. Ren Bartoe, Vesuvius |
|
Toivo Janhunen & Tarmo Pesonen, Tamglass Engineering Ltd. Oy |
