General

Novel process for the fast production of pyrolytic superlow-e coatings during glass production and processing

Tommi Vainio

The need for low-emissivity glasses arises obviously from the need to save energy. The Window Energy Rating (WER) takes into account both the heat leakage through the window as well as the heat gain from the solar energy. Generally both hard coated low-e glasses (based on transparent conductive oxid...

The Critical Relationship Between Glass Surface Quality and The Tempering Rollers

Bill Zhao & Ren Bartoe

The author discusses the critical physical and chemical properties of fused silica ceramic rollers used in the horizontal heat-treating process for safety glass. Those properties coupled with the care and maintenance of rollers and the operating parameters of the tempering furnace are directly assoc...

Cost – Benefit Rate of a Tool Set

Giuseppe Falcone

There are many ways to evaluate the performance of a tools set on a machine, but generally the most considered one is pure cost, due to its directness. The pure cost of set, however, is not always a true and effi cient driver for the appraisal of cost/benefi t rate of tools set on the machine. Belo...

50 Articles   Page 1 of 4   Articles 1 - 15

P Marc LaFrance
Rick Wilberforce, Market Development Manager – Europe, Pilkington Group Limited
Rick Wilberforce, Market Development Manager – Europe
Harald Biel, WOLFF+MEIER Isolierglaswerke GmbH & Co. KG
Tuomo Nuottimäki
Arthur Ulens, Executive Vice President AGC Flat Glass and CEO Glaverbel
Ashley Torr, Pilkington Automotive
Bernhard Weller & Thomas Schadow, Technische Universität Dresden
Florian Döbbel, Glas Statik Konstruktion GmbH
J. Belis & R. Van Impe, Ghent University,Technology
A. Piras, Cagliari University
Freek Bos, Fred Veer, Elke van Nieuwenhuijzen & Christian Louter, Delft University of Technology
Jan Belis, Ghent University
Jean-Paul Hautekeer, Markus Plettau, Patrick Vandereecken & Patrice Sauro, Dow Corning SA
© Copyrights glassfiles.com by GPD
Supported By