Automotive

294 Articles   Page 6 of 20   Articles 76 - 90

Toughened Laminates – How to Prevent an Architects Dream Becoming a Manufacturer’s Nightmare?
John H. Gilleeney, AGI Glass Pty Ltd
Measuring the delaminating energy in laminated safety glass
Uwe Keller, Kuraray Specialities Europe GmbH
Fine Conductor Printing onto Glass
Mr. Roland Drach, Sefar AG Printing Division
Mr. Frank Rubbert, Saint-Gobain Glass Deutschland GmbH
The Critical Relationship Between Glass Surface Quality and The Tempering Rollers
Mr. Ren Bartoe, Vesuvius
Quality Control in Flat Glass Fabrication
Mr. Peter Anderson, Viracon, Inc.
Biaxial Strength of Float Glass Plates with Center Hole
Dr. Michael Emonds, Aachener Chemiche Werke
Dr. Suresh T. Gulati, Research Fellow & Consultant, Corning Inc.
Arto Kaonpää, Tamglass Ltd. Oy
Effect of Different Edges Treatments on the 4-point Bending Strength of Normal and Tempered Glass
Roberto Corti, Z.Bavelloni Spa
Arto Kaonpää, Tamglass Engineering Ltd. Oy
Antti-Pekka Nikkilä, Tampere University of Technology
Competitive success through supply chain management in the glass industry
Ann Vereecke, Vlerick Leuven Gent Management School and Ghent University
Steve Muylle, Vlerick Leuven Gent Management School
The Effects of Weather onto Glazing and Their Influence - Part I: The soiling by weather on the outside surface of glazing
Hans Joachim Gläser
Infrared Thermometers: Control Glass Temperature, Faster Start Up, Less Scrap, 100% Detection of Defective Parts
Vern Lappe, Vice President, Technical Services, Ircon Inc
Glass and Coatings
Kevin Sanderson
Bending and Tempering Technology, New Experiences and Technology
Reduction of Pre-production Cost
Ivan Ferrari
Theory of Glass Tempering and Edge Work Effect to the Final Product Quality
Modern Safety Glazing – Demand, Challenge and Opportunity
Page: 1 2 3 4 5 6 7 8 9 10 More pages     Previous    Next
© Copyrights glassfiles.com by GPD
Supported By