Glass canopies for the office center of the DZ Bank in Berlin
Rudolf Hess,
Glasconsult, structural engineering of glass
Glass Performance Days 2007
Conference Proceedings Book
Order hard copy of the over 250 conference papers!
Maurizio Froli & Leonardo Lani, University of Pisa
The strength of a structural glass component submitted to increasing loads depends strongly on many factors like temperature, humidity, loads introduction and also on the geometrical features of the component itself. It is well known that glass cannot develop plastic deformations and that it is so e...
Vlad Sklyar & Mike Shevelev, Gyrotron Technology, Inc
New ways of treating glass by high frequency microwave (HFM) are described. Solution of heat equation with HFM as a heat source allows selecting the HFM optimal parameters such as uniformity, frequency and power density for thermal processing of automotive glass. Computed and experimental data for ...
Kimmo Simomaa, CCD Photonics Ltd
The methods of electronic imaging have been applied to control the esthetic quality of automotive glass production. The benefits and limitations of a low cost system have been discussed using some practical examples. The camera system is used in the final inspection of windscreens and in the initial...
|
A C Woodward & C Hanley, Pilkington Automotive |
|
|
Bernard Jean Savaëte, BJS.Différences |
|
|
Nadezhda Kondratieva & Vladimir Zubkov, Testing Centre of Samara State University of Architecture and Civil Engineering Alexander Chesnokov, Public Corporation Glass Institute Stanislav Chesnokov, Moscow Engineering Physics Institute |
|
|
Abhi Ray, University of Technology, Sydney Dr Leon Jacob, Jacob and Associates Pty Ltd |
|
|
Fred Veer, J. Zuidema & F.P.Bos Delft University of Technology |
|
|
Mauri Saksala, Tamglass Ltd. Oy |
|
|
Mizuki Nishi, Yoshinori Akamatsu, Shinji Nishikawa & Kentaro Tsutsumi, Central Glass Co., Ltd. |
|
|
Mr. Ren Bartoe, Vesuvius |
|
|
George Neuman, Anthony V. Longobardo, Daniel Prone |