Search Library
Russia federation towers – A structural glazing façade at the highest stage of energy saving
Werner Wagner, Sika Services AG
Glass Performance Days 2007
Conference Proceedings Book
Order hard copy of the over 250 conference papers!
Insulated glass (IG)
Climatic loads in curved insulated glasses
Jürgen Neugebauer, University of Applied Science, Graz, Austria
A current tendency by the architects is to design glass cladding or windows with curved glass. This glass can be monolithic bent glass, bent laminated safety glass or insulated glass. A special topic is the design of a bent insulated glass. A difficult part of the structural analysis is to find valu...
How to improve your profitability with the latest glass processing machinery and software solutions
Eero Jalkanen
Did you know that, on average, quality costs in the glass industry can amount to 25% of sales? This is mainly due to machinery being used far below its design capacity and the total manufacturing process not being under control. Let’s take a few good examples to prove our point. A good capacity for ...
Warm edge insulating glass spacer trends and practical cost analysis
Werner Lichtenberger
A review of historical trends in the design and performance of insulating glass spacers with a comprehensive technical analysis of designs and components and their impact on the long term energy savings benefits....
123 Articles Page 1 of 9 Articles 1 - 15
 |
Hans Gfeller |
|
Dr. Werner Wagner & Ulli Müller, Sika Services AG |
|
V.F. Solinov, OJSC “NITS” |
|
Shi Xinyong, Han Song, Chen Lu and Dai Lei, China Building Materials Academy, China Building Materials Test and Certification Center (China Safety Glass Certification Center) |
|
Ralf Greiner & Dirk Seidel, GUARDIAN Flachglas GmbH |
|
Dr.-Ing. Frank Schneider, OKALUX GmbH |
|
Dr.-Ing. Frank Schneider and Oliver M. Hübler, OKALUX GmbH |
|
M.Rottmann & A.Kraft, Gesimat GmbH T.Häusler & U.Fischer, Brandenburg University of Technology H.Stenzel, Kuraray Europe GmbH, Division TROSIFOL |
|
Mr. Gerhard Reichert, Edgetech I.G. Inc. |
|
Klaus Puschmann, Lenhardt Maschinenbau GmbH |
|
Insulating glass units: the effects of seal stresses and deformations on durability and service life
Adrian Panait, Michel Cossavella, Gérard Delsahut, Jean-Louis Galéa, Karine Morcant Centre Scientifique et Technique du Bâtiment |
|
Dr. Raghu Padiyath, Dr. Jayshree Seth 3M Company |
