Bending & Tempering

Adjustable Mould for Architectural Freely Curved Glass

Daan Rietbergen, Delft University of Technology, Netherlands

In the article, the need is discussed for improving bending techniques for freely curved glass, through linking modern events to the Art Nouveau movement. The author proposes a molding technique derived from other disciplines and adepts this technique for curving glass....

Another cause for spontaneous breakage of tempered glass – silicon particles in tensile zone

Mr. YANG Jianjun, Xinyi Glass Holdings Limited & Mr. SHI Xinyong and Dr. BAO Yiwang, China Building Materials Academy

It has been discovered and demonstrated via SEM examination on six samples of broken tempered glasses that one of important causes for spontaneous breakage of tempered glass is due to the monolithic silicon particle inclusion, rather than only nickel sulfide particles which many people in glass indu...

Bending strength and fracture of glass materials under the different loading conditions

Yurii Rodichev, Alexandr Netychuk, Vladimir Bodunov, Yury Yevplov, Vladimir Maslov

Shapes and sizes of surface micro-cracks have the significant influence on glass component strength and durability as well as on the component fracture behavior under mechanical loading. The results of experimental study of bending strength and specific surface micro-crack growth at the flat glass c...

84 Articles   Page 1 of 6   Articles 1 - 15

Meeli Kõiva-Vällo, FIE Meeli Vällo
Dr. Peter Hof, Staatliche Materialprüfungsanstalt Darmstadt (State Material Testing Institute)
Prof.dr.ir. Mick Eekhout, TU Delft, Octatube & Dipl.-Ing. Stephan Niderehe, Consultant
Prof.dr. Mick Eekhout, TU Delft / Octatube International & Walter Lockefeer, Delft University of Technology & Dries Staaks, Octatube International
Graham Dodd, Arup Materials Consulting & Sebastian Thieme, Technical University of Dresden
J. B. ColvinJCGC Limited
J. B. Colvin, JCGC Limited
dr. ir.-arch. Jan Belis & prof. dr. ir. Rudy Van Impe & ir.-arch. Dieter Callewaert, Ghent University, Laboratory for Research on Structural Models, Ghent, Belgium & ir. Bart Inghelbrecht, CEI – De Meyer, Nazareth, Belgium
Tomás Baenas, Cristalería Soler Hnos., S.A. & Jaime Ramis & Jenaro Vera, Universidad de Alicante. Dpto. de Física Aplicada y Teoría de la Señal & Jesús Alba, Universidad Politécnica de Valencia. EPS Gandía. Dpto. Física Aplicada
Maurizio Froli & Leonardo Lani, University of Pisa
Nadezhda Kondratieva & Vladimir Zubkov, Testing Centre of Samara State University of Architecture and Civil Engineering
Alexander Chesnokov, Public Corporation Glass Institute
Stanislav Chesnokov, Moscow Engineering Physics Institute
Abhi Ray, University of Technology, Sydney
Dr Leon Jacob, Jacob and Associates Pty Ltd
© Copyrights glassfiles.com by GPD
Supported By