Flat Tempering

Sears Tower Skydeck Observation Boxes

John Kooymans

The landmark Sears Tower building in Chicago, Illinois generates income through its observation deck at the 103rd floor. Halcrow Yolles was approached by the building owners to help create four structural glass observation galleries that would project beyond the existing building façade and allow pa...

Experimental Investigation of Residual Stresses in Toughened Glass

Jens Henrik Nielsen, John Forbes Olesen, Henrik Stang, Department of Civil Engineering, Technical University of Denmark

Toughened glass is often used in load carrying elements due to the relatively high tensile strength compared with float glass. The tensile strength of toughened glass is a combination of the pure material strength and the residual stresses imposed by the toughening process. This paper is concerned w...

How to Affect Residual Stresses in Glass Tempering

Antti Aronen & Reijo Karvinen, Tampere University of Technology,Finland

In order to stand high loadings, the glass used in windows and glass constructions must be tempered. In the tempering process the purpose is to create a compressive stress near the glass surface. This can be achieved with proper control of heat transfer, which effects the stress distribution in glas...

94 Articles   Page 1 of 7   Articles 1 - 15

The Critical Relationship Between Glass Surface Quality and The Tempering Rollers
Bill Zhao & Ren Bartoe
Profitability of the glass tempering line
Kari Heikkilä, Glaston Singapore
Another cause for spontaneous breakage of tempered glass – silicon particles in tensile zone
Mr. YANG Jianjun, Xinyi Glass Holdings Limited & Mr. SHI Xinyong and Dr. BAO Yiwang, China Building Materials Academy
Heat soak test (HST) with high reliability
Dr. Chihiro Sakai, Nippon Sheet Glass Techno-Research Co.,Ltd. and Masashi Kikuta, Nippon Sheet Glass Co.Ltd.
New laminated composite materials based on float glass
Maslov V.P., V.E. Lashkarjov Institute of Semiconductor Physics of NASU & Rodichev Yu.M., G.S. Pisarenko Institute for Problems of Strength of NASU
Sensors for glass handling
Dr. Thomas Rainer, Boraglas GmbH
An implementation of 3D viscoelastic behavior for glass during toughening
Jens Henrik Nielsen, John Forbes Olesen, Henrik Stang, Peter Noe Poulsen
BYG-DTU
The high performance Low-E tempering process
Eero Jalkanen, Product Group Manager
Glaston Services Ltd.
The use of heat stenghened laminated glass in bolted applications at Suvarnabhumi Bangkok international airport
Richard Green & Stanley Yee, The Facade Group LLC, John Perry, Connell Wagner
The drilling process – an approach to improvement and better understanding
Michael Emonds & Djomka Hartmann, Aachener Chemische Werke & P.-H. Kroehs & A. Barth, BOHLE AG & Arto Kaonpää, Glaston Services Ltd. Oy
The analysis of bent heat treated glass breakages
J. B. ColvinJCGC Limited
Comparison of Monolithic and Laminated Glass Subjected to Barrier Loads
J. B. Colvin, JCGC Ltd.
Page: 1 2 3 4 5 6 7            Next
© Copyrights glassfiles.com by GPD
Supported By