Architectural design

Prof.dr.ir. Mick Eekhout, TU Delft, Octatube & Dipl.-Ing. Stephan Niderehe, Consultant

Prof.dr. Mick Eekhout, TU Delft / Octatube International & Walter Lockefeer, Delft University of Technology & Dries Staaks, Octatube International

Dipl.-Ing. Thiemo Ebbert & Prof. Dr.-Ing. Ulrich Knaack, TU Delft, Chair Design of Construction

Mark DuBois, Ohlhausen DuBois Architects

Roland Drach, Sefar AG. Printing Division

Graham Dodd, Arup Materials Consulting & Sebastian Thieme, Technical University of Dresden

Marco Devigili & Maurizio Froli, Structural Engineering Department, University of Pisa

Eva Cuerva, Industrial Engineer & Dr. Eng. Pere Alavedra, Construction Engineering Department Professor & Mauricio Torres, Architect, construction engineering PhD candidate, Universitat Politècnica de Catalunya & Carla Planas, Industrial Engineer, Grupo J

Alexander G. Chesnokov, Head of the standardization and testing department & Elena A. Cheremkhina, Research officer of the standardization and testing department, OAO “Glass Institute”

James Carpenter & David Norris, James Carpenter Design Associates, Inc.

ir.-arch. Dieter Callewaert, dr. ir.-arch. Jan Belis, prof. dr. ir. Rudy Van Impe, prof. dr. ir. Guy Lagae and ir. Matthieu De Beule, Ghent University, Laboratory for Research on Structural Models, Department of Structural Engineering

ir.-arch. Dieter Callewaert, dr. ir.-arch. Jan Belis, prof. dr. ir. Rudy Van Impe, prof. dr. ir. Guy Lagae & dr. ir. Wesley Vanlaere, Ghent University, Laboratory for Research on Structural Models, Department of Structural Engineering

Alex Brykov, St Petersburg State Institute of Technology

Mario Brunn, Sefar AG

Dr. Kaja Boxheimer, Darmstadt University of Technology