Quality and Production control

How to improve your profitability with the latest glass processing machinery and software solutions

Eero Jalkanen

Did you know that, on average, quality costs in the glass industry can amount to 25% of sales? This is mainly due to machinery being used far below its design capacity and the total manufacturing process not being under control. Let’s take a few good examples to prove our point. A good capacity for ...

Novel process for the fast production of pyrolytic superlow-e coatings during glass production and processing

Tommi Vainio

The need for low-emissivity glasses arises obviously from the need to save energy. The Window Energy Rating (WER) takes into account both the heat leakage through the window as well as the heat gain from the solar energy. Generally both hard coated low-e glasses (based on transparent conductive oxid...

Optimization Design and Robustness of glass Structure

Yiwang Bao

In the last decade, glass structures have found their increasing use in modern buildings. The design optimization and robustness requirement of the glass components have attracted great attention in both architectural and engineering communities across the world. Understanding the structural perform...

78 Articles   Page 1 of 6   Articles 1 - 15

The Critical Relationship Between Glass Surface Quality and The Tempering Rollers
Bill Zhao & Ren Bartoe
Optical quality control in the pre-processing of tempered glass
Mr. Kai Vogel, Viprotron GmbH
The failure strength of glass, a non transparent value
F.A.Veer and T.Riemslag, Delft University of Technology & T. Romein, van Noordenne glas groep
Measuring the daylight and solar energy properties of glazing
Peter A. van Nijnatten, TNO Science & Industry
Introduction to China compulsory product certification of safety insulated glass units used in buildings
Shi Xinyong, Han Song, Chen Lu and Dai Lei, China Building Materials Academy, China Building Materials Test and Certification Center (China Safety Glass Certification Center)
Safety and security of façade design through quality of processes and components
Mr. Dirk Schulte, DORMA-GlasTec GmbH
Low temperature inelasticises of silica-glasses
Dr.-Ing. Frank Schneider, OKALUX GmbH
Insulating glass unit: comparison of laboratory tests according to EN 1279
Ennio Mognato, Andrea Stevanato, Luca De Riu
Stazione Sperimentale Del Vetro
Improving testing procedures to obtain more reliable strength data for structural glass design
Dr. Matthias Haldimann, Emch+Berger AG Bern – Engineering and Consulting & Michel Crisinel, Ecole polytechnique fédérale de Lausanne (EPFL), Steel Structures Laboratory (ICOM)
Problem of splitting of glass in two layers during horizontal tempering operation
A. K. Chakrabarty, global head (quality), AIS Float Glass
The new glass design approach used in Australian standard, AS1288
Dr Ignatius Calderone, Director, Calderone and Associates Pty Ltd.
The New Glass Frosting Paste
Sidelnikova Olga, Sidelnikov Anatolij, Svistunov Dmitrij
Page: 1 2 3 4 5 6            Next
© Copyrights glassfiles.com by GPD
Supported By