Harald Biel
After implementing the cutting control system DynOpt in connection with HEGLA SortJet five years ago, long-term studies have not only confirmed the results presented here but it has become evident that due to the constant optimisation of the system which had been piloted then by Wolff+Meier Glaswerk...
Bill Zhao & Ren Bartoe
The author discusses the critical physical and chemical properties of fused silica ceramic rollers used in the horizontal heat-treating process for safety glass. Those properties coupled with the care and maintenance of rollers and the operating parameters of the tempering furnace are directly assoc...
Xinchun (Steven) Wang, Institute of Technical Information for Building Materials Industry of China
China flat glass output is 17.5 mt in 2005, accounting for 40% of the world total. 86% of the output was produced by 142 float glass lines. China is producing 38% of global float glass. More than 7 million tons of SCE is consumed per year. In March 2006 a primary survey on China float glass sector e...
|
Vincenzo M. Sglavo, DIMTI - University of Trento and Christine Müller & Francesca Righetti, Glas Müller Vetri Spa |
|
|
Elisabeth Flygt and Stellan Persson, Glafo, the Swedish Glass Research Institute |
|
|
Michael Degel Jenoptik Automatisierungstechnik GmbH |
|
|
Ernst Bachofner, Milamy Partners LLC |
|
|
Mohamed Ali Hassan Zenhoum, Helwan University |
|
|
Oliver Englhardt & Konrad Bergmeister, University of Natural Resources and Applied Life Science |
|
|
V.P. Maslov & V.E. Lashkarjov, Institute of Semiconductor Physics of HASU Yu.M. Rodichev & Yu. N. Yevplov, G.S. Pisarenko Institute for Problems of Strength of HASU |
|
|
Hans Joachim Gläser |
|
|
Dr. Alexander Zhymalov, Dr. Valery Kondrashov |
|
|
Sabina Botea |