Numerical modelling

Damping of Glass Structures and Components

Peter Lenk, Graham Coult

In this paper, the dynamic properties of a glass structures and glass components will be discussed. A short introduction to dynamic load will be presented as well as the basic principles of calculus used behind the widely understood finite element analysis. A comprehensive review of the various damp...

Reduced Order Modeling for Glass Manufacturing Process

Satyajit K. Wattamwar, Dr. Siep Weiland, Prof. A.C.P.M. Backx
TU Einhoven

Industrial Glass Manufacturing Process (IGMP) is one of the complex, multiphase, distributed parameter systems. It inherently includes various physiochemical effects with a large variation in process time constants. This is further accompanied by very limited in-situ information available in the for...

Model Reduction for Processes with Parametric Uncertainty

Satyajit Wattamwar, Siep Weiland, Ton Backx
TU Eindhoven

Objective: Develop generic model reduction methodologies to obtain computationally efficient, reliable, accurate dynamic process models for complex nonlinear process with parametric uncertainty....

41 Articles   Page 1 of 3   Articles 1 - 15

The aesthetics of transparency - conceptual design for an all-glass façade system
K. Bergmeister, O. Englhardt, R. Hilber, Institute of Structural Engineering, University of Natural Resources and Applied Life Sciences Vienna
Mechanical properties of laminated safety glass - FEM Study
Pol D’Haene & Dr. Gérard Savineau, Saflex, a unit of Solutia Inc
Numerical modeling of coercible gas natural convection for IGU thermalphysic behavior analysis
Stanislav A. Chesnokov, Senior lecturer and Boris I. Krasnopolskiy, Post-graduate student, Department of Applied Mathematics, Moscow Engineering Physics Institute (State University) & Alexander G. Chesnokov, Head of the standardization and testing departm
A thermal modeling comparison of typical curtainwall glazing systems
Lawrence D. Carbary, Associate Industry Scientist, Dow Corning Corporation & Fiby Albert, Application Engineer/Technical Service, Dow Corning Seneffe
Use of solar desiccant air-conditioning systems in spandrels of commercial buildings
Mr. Anthony Domenic Calderone, Connell Wagner& Dr Ignatius Calderone, Director, Calderone and Associates Pty Ltd.
Calculation program for surface temperatures of window glazing and the appearance of condensation
Hans Joachim Gläser
Numerical Modeling of Shaping and Strengthening of Glass Sheets for Automotive and Buildings
L. Zhang, G. De Leede and R. Koch, GS Improve
M. Khalil, Windsun
Structural Behaviour of Plane Glass Surface Structures Under Compression Stress - Numerical and Experimental Investigation
Oliver Englhardt & Konrad Bergmeister, University of Natural Resources and Applied Life Science
Flexible, Consistent and Safe Design of Structural Glass Elements
Matthias Haldimann, Ecole Polytechnique Fédérale de Lausanne
Some Steps in the Methods of the IGU Characteristics Calculation Evolution
Alexander G. Chesnokov, OAO “Glass Institute”
Stanislav A. Chesnokov, Moscow Engineering Physics Institute (State University)
Buckling Design of glass elements under compression
Andreas Luible
Michel Crisinel
A Detailed Numerical Investigation of Insulated Glass subjected to the Standard Pendulum Test
Stefan Brendler
André Haufe
Thomas Ummenhofer
Page: 1 2 3            Next
© Copyrights glassfiles.com by GPD
Supported By